12V 5A Smart Battery Charger for Car Motorcycle

Specifications Battery type: suitable for all 12V AGM, Gel, Immersion (Wet), Calcium type deep cycle, Maintenance-free VRLA lead-acid batteries Battery Capacity:4Ah - 100Ah Charging current: 5A Input Voltage:100-240V AC 50/60Hz 75W Input Current:0.5A (RMS)@230VAC Charging Voltage:Summer Mode:14.4V;Normal Mode:14.7V;Winter Mode:15.5V Operating Temperature: -20°C to +45°C (-4°F to 111°F) Cooling: fan Size:150*85*60mm(0.6*0.34*0.24inch) Weight: about 380g (0.84lb) HOW TO USE 1. Please reconfirm that your battery parameters are compatible with the charger (on the back of the charger). 2. Carefully connect the red clip to the positive (+) pole, and the black clamp to the negative pole. 3. Battery voltage, charging current and internal temperature will be displayed on the LCD display. (The temperature is for reference only, allowed for tolerance). 4. Wrong warning to connect the battery: "EI-I-" will be displayed on the screen, and the signal light will flash. 5. Connect the AC power supply to the charger, the charger will start working. (The charging light will start flashing red). 6. Once the battery is fully charged, there will be "full" letters on the screen, meanwhile, the charging signal light will still be on. It is highly recommended to keep the charging state for 1-2 hours. 7. Charging complete, remove the charger. Note:For 4Ah-15Ah battery, we suggest to use the "Repair" mode, because the battery size is very small, the use of pulse charging is very good for the small size battery. Package Included 1 x Car Battery Charger 1 x User Manual Note: please read the user manual before use; indoor use only; turn off the power supply before connecting or disconnecting the battery